BWSQC - A17001 ANALYTE CYANIDE-1
- MSDS: BWSQC
- Manufacturer: LACHAT INSTRUMENTS
- Product Name: A17001 ANALYTE CYANIDE-1
- National Stock Number: 6640-01-380-7731
Product Identification
Product ID:A17001 ANALYTE CYANIDE-1
MSDS Date:10/26/1994
FSC:6640
NIIN:01-380-7731
MSDS Number: BWSQC
Responsible Party
MILWUAKEE, WI 53218-1239
US
Emergency Phone: 414-358-4200
Info Phone: 414-358-4206
Cage: 78384
Contractor
Telephone: 414-358-4200
Cage: 78384
Ingredients
SODIUM HYDROXIDE (CERCLA)
CAS: 1310-73-2
RTECS: WB4900000
Fraction By Weight: 1%
OSHA PEL 2 MG/M3
ACGIH TLV: C 2 MG/M3; 9495
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 99%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE; HARMFUL IF INHALED, INGESTED OR
ABSORBED THROUGH THE SKIN. CAUSES SEVERE BURNS TO SKIN AND EYES.
INHALTION MAY BE FATAL DUE TO SPASMS, EDEMA OF BRONCHI & LARYNX,
CHEMICAL PNEUMONITIS, PULMONARY EDEMA. CHRONIC: NONE SPECIFIED BY
MANUFACTURER.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:BURNING SENSATION, COUGHING, WHEEZING,
LARYNGITIS, SHORTNESS OF BREATH, NAUSEA, VOMITING.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES-IMMEDIATELY FLUSH WITH WATER FOR 15 MINUTES; HOLDING
LIDS OPEN. SKIN-REMOVE CONTAMINATED CLOTHES. WASH WITH MILD SOAP &
WATER. INHALED-REMOVE TO FRESH AIR. ADMINISTER OXYGEN OR ARTIFICIAL
RESPIRA TION AS NEEDED. INGESTED-IF CONSCIOUS, WASH OUT MOUTH WITH
WATER. CONTACT POISON CONTROL CENTER AND OBTAIN IMMEDIATE MEDICAL
ATTENTION.
Fire Fighting
Extinguishing Media:USE MEDIA APPROPRIATE FOR SURROUNDING FIRE. DO NOT
USE WATER.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
FULL PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:EMITS TOXIC FUMES UNDER FIRE CONDITIONS.
Accidental Release
Spill Release Procedures:EVACUATE AREA. WEAR SELF-CONTAINED BREATHING
APPARATUS, RUBBER BOOTS, HEAVY RUBBER GLOVES. NEUTRALIZE WITH 5%
ACETIC ACID SOLUTION, ABSORB WITH INERT MATERIAL AND PLACE IN A
CONTAINER FOR LATER DISPOS AL. VENTILATE AREA & WASH SITE WITH
WATER.
Neutralizing Agent:5% ACETIC ACID SOLUTION.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY PLACE. KEEP
TIGHTLY CLOSED. KEEP AWAY FROM INCOMPATIBLE MATERIALS. USE ONLY IN
A CHEMICAL FUMES HOOD.
Other Precautions:WEAR PROPER PERSONAL PROTECTIVE EQUIPMENT/CLOTHING
(RESPIRATOR, GLOVES, FACE SHIELD). DO NOT BREATH DUST/MIST. DO NOT
GET IN EYES, ON SKIN OR CLOTHES. AVOID PROLONGED OR REPEATED
EXPOSURE.
Exposure Controls
Respiratory Protection:IF ENGINEERING CONTROLS FAIL OR NON-ROUTINE USE
OR AN EMERGENCY OCCURS; WEAR AN MSHA/NIOSH APPROVED RESPIRATOR OR
AN AIR-SUPPLIED RESPIRATOR OR SCBA, AS REQUIRED. USE IN ACCORDANCE
WITH 29 CFR 1910.13 4 AND MANUFACTURER'S RECOMMENDATIONS.
Ventilation:USE ONLY UNDER CHEMICAL FUME HOOD TO MAINTAIN EXPOSURE
BELOW TLV(S).
Protective Gloves:RUBBER, PVC, NEOPRENE.
Eye Protection:SAFETY GLASSES W/FACESHIELD.
Other Protective Equipment:CLOTHING TO PREVENT PROLONGED OR REPEATED
EXPOSURE. EYE WASH STATION & SAFETY SHOWER.
Work Hygienic Practices:WASH HANDS AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health
PHYSICAL CHARACTERISTS AND MUCH OF OTHER DATA IS FOR SODIUM HYDROXIDE
IN SOLID PELLET FORM AND NOT THE DILUTE AQUEOUS SOLUTION AS
PROCURED FOR THIS NSN. THESE TUBES OF SOLUTION ARE USED IN A
DISTILLAT ION PROCESS TO DETERMINE CYANIDE CONTENT.
Chemical Properties
HCC:B1
Melt/Freeze Pt:M.P/F.P Text:604F,318C
Vapor Pres:<18
Vapor Density:>1
Spec Gravity:2.130
Solubility in Water:APPRECIABLE
Appearance and Odor:WHITE PELLETS (PER MFR MSDS)-CLEAR, COLORLESS
LIQUID IS WHAT IS PROCURED.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG MINERAL ACIDS, ORGANIC MATERIALS,
CHLORINATED SOLVENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NATURE OF DECOMPOSITION PRODUCTS NOT
KNOWN.
Disposal
Waste Disposal Methods:ADJUST PH TO NEUTRAL, SEPARATE ANY INSOLUBLE
SOLIDS OR LIQUIDS AND PACKAGE FOR DISPOSAL AS HAZARDOUS WASTE.
FLUSH WITH AQUEOUS SOLUTION DOWN THE DRAIN WITH EXCESS WATER.
DISPOSE OF IAW ALL LOCAL, STAT E AND FEDERAL ENVIRONMENTAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.